1/32″ Down-Cut Spiral Bit – 1/8″ Shank (AstraHP Coated)

Solid carbide down cut 2 flute router bit with 3/32″ length of cut. The flutes are designed to push the chips downward and they also help with fraying and chipping on your work piece. Speeds and Feeds For hardwood and shell, we recommend the following starting point: Spindle Speed: 24,000RPM Feed rate: 8.0 IPM Plunge rate: 3.0 IPM Recommended starting points only, does not warranty against tool breakage. Speeds and feeds ma vary depending on material type and thickness, always make test cuts with shallow passes in scrap material to verify speeds and feeds work for your machine and setup.